Metallurgical portrayal of AA6061 with Nano Sic Combined by FSP

Authors

  • S.N Sundar Dept of Mechanical Engineering (MTMR), AMK Technological Polytechnic College, Chennai, Tamilnadu.
  • R. Poongothai Dept of Mechanical Engineering (Sandwich course), Central Polytechnic College, Taramani, Chennai, Tamilnadu
  • V. Sivaraman Department of Mechanical Engineering, Panimalar Polytechnic College, Chennai, Tamilnadu
  • S. Suresh Kumar Department of Mechanical Engineering, Panimalar Polytechnic College, Chennai, Tamilnadu.
  • C. Inigo Dept of Mechatronics Engineering, Government Polytechnic College, Purasawalkam, Chennai, Tamilnadu.

Keywords:

Metallurgy, Nano Silicon carbide, Surface composite, square tool

Abstract

In this research work production of nano Sic armored AMC via FSP method is studied in this paper. The considered substances of Sic nano powder were packed down into a channel of 100 mm × 50 mm x0.5mm plate for the required dimensions. A sole pass of friction stir processing was conceded out with rotational speed of 600 rpm, dispensation speed of 60 mm/min and tool thrust force of 6 KN. An oil hardened tool made of D2 steel having squared contour is worn. Metallurgy and Vickers hardness of the made-up AMC were analyzed. Scanning Electron Microscope revealed a mere even circulation of nano Sic particle which were measly able-bodied to the matrix alloy. The hardness of synthesized surface composite is augmented by 39% elevated than that of the base alloy.

Downloads

Published

2019-05-01

How to Cite

Sundar, S. ., Poongothai, R., Sivaraman, V. ., Kumar, S. S. ., & Inigo, C. . (2019). Metallurgical portrayal of AA6061 with Nano Sic Combined by FSP. International Journal of Technical Innovation in Modern Engineering & Science, 5(5), 542–545. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/2423

Issue

Vol. 5 No. 5 (2019): Vol. 5 No. 5: Volume 5 Issue 5 (May-2019)

Section

Articles