🕔 Call For Paper — Vol. 12  |  Issue 4  |  December 2026  |  Deadline: 20-Dec-2026
Track Paper Submit Paper Contact

Paper Details

Home › Archives › Paper Details
← Back to Issue
Vol. 5  No. 4 (2019) · Articles

EXPERIMENTAL INVESTIGATION ON QUICK SETTING ALKALI ACTIVATED CONCRETE

Ravikumar D. Padsumbiya
Department of civil engineering, Marwadi Education Foundation, Rajkot, Gujarat, India , IN

Prof. Shemal Dave
Department of civil engineering, Marwadi Education Foundation, Rajkot, Gujarat, India , IN

📅 Published: April 2019

Keywords: ambient cured alkali activated concrete, Compressive Strength, Split Tensile Strength, Flexural Strength

📄 View / Download PDF ⬇ Download

Abstract

Alkali activated concrete (AAC), gained significant attention by researchers, educators and construction practitioners during past decades. Due to its rapid strength gain and better mechanical properties it proved better alternative to cement concrete. However, its field application is still limited due poor workability and lack of data. Moreover traditional AAC required an elevated curing, which again was a major drawback for in situ construction. Many researchers have tried to eliminate this drawback by using different pozzolanic binders and came up with the AAC that doesn’t required any heat curing. This research paper represents strength parameter of AAC cured at ambient temperature and tested at the age of seven days for compressive strength test, splitting tensile strength test and flexural strength test. Three different pozzolanic binder Fly ash (FA), Ground granulated blast furnace slag (GGBFS) and silica fume (SF) have been used to prepare ambient cured AAC.

How to Cite

Ravikumar D. Padsumbiya, Prof. Shemal Dave, “EXPERIMENTAL INVESTIGATION ON QUICK SETTING ALKALI ACTIVATED CONCRETE,” International Journal of Technical Innovation in Modern Engineering & Science, vol. 5, no. 4, pp. 387-395, April 2019.

References

NA

🔒 Content is protected — © IJTIMES