FABRICATION OF SIMULTANEOUS DRILLING AND GRINDING MACHINE

Authors

  • BIJJE MADHU, V M-Tech student, Department of mechanical engineering, JNTUA CEP, AP, INDIA
  • MADHU SUDHAN REDDY Assistant Professor (Adhoc), Department of mechanical engineering, JNTUA CEP, AP, INDIA.

Keywords:

Bevel gear mechanism, AC motor, Drilling, Grinding, Pedestal bearings

Abstract

 In present days worldwide industrial sectors are done drilling and grinding operations with separate machines. So we can invent the fabrication of simultaneous drilling and grinding machine. This machine is mainly designed for simultaneously drilling and grinding operations, this machine is runs with bevel gear mechanism. Bevel gears are attached to the AC motor rotating shaft with help of bush rod like differential manner, electric power is needed for drilling operation. Already stepped pulley and bevel gear is fixed on AC motor rotating shaft. Now power is transmitting motor pulley to drilling machine pulley through the belt. Grinding operation can be done on both sides, one is clock-wise direction and another one is anti-clock wise direction. This machine is mainly used in production
industries and domestic purpose.

Downloads

Published

2018-12-19

How to Cite

V, B. M. ., & REDDY, M. S. (2018). FABRICATION OF SIMULTANEOUS DRILLING AND GRINDING MACHINE. International Journal of Technical Innovation in Modern Engineering & Science, 4(12), 322–328. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/193

Issue

Vol. 4 No. 12 (2018): Vol. 4 No. 12: Volume 4 Issue 12 (December-2018)

Section

Articles