DESIGN AND FABRICATION OF HACKSAW MACHINE USING SCOTCH YOKE MECHANISM

Authors

  • K Pavan Prabhakar Dept. of Mechanical Engineering New Horizon College of engineering Bangalore.
  • Pawan Gowda D S Dept. of Mechanical Engineering New Horizon College of engineering Bangalore.
  • Mohammed Nabil Dept. of Mechanical Engineering New Horizon College of engineering Bangalore.
  • Tejas Rai S P Dept. of Mechanical Engineering New Horizon College of engineering Bangalore.
  • Manjunath G Dept. of Mechanical Engineering New Horizon College of engineering Bangalore.

Keywords:

Cutting , motor , scotch yoke mechanism

Abstract

Increasing the productivity is one of the main requirements of the production engineering. Either reducing operation time or improving the capability of the machine to produce the components in an increased number is essential for an industry to achieve the same. This project employs the scotch yoke mechanism in power hacksaw machine which enables it to cut two components at a time thereby improving the productivity. This device uses scotch yoke mechanism. The scotch yoke mechanism converts the rotary motion into reciprocating motion and vice versa. Double acting hacksaw increases the production rate by cutting two work pieces at a time.

Downloads

Published

2021-11-20

How to Cite

Prabhakar, K. P., D S, P. G., Nabil, M., S P, T. R., & G, M. (2021). DESIGN AND FABRICATION OF HACKSAW MACHINE USING SCOTCH YOKE MECHANISM. International Journal of Technical Innovation in Modern Engineering & Science, 4(6), 1399–1403. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/1974

Issue

Vol. 4 No. 6 (2018): Vol. 4 No. 6: Volume 4 Issue 6 (June-2018)

Section

Articles