Optimization of MIG welding process parameter for minimizing heat affected zone

Authors

  • Rakesh Kumar M.E Scholar, Department of Mechanical Engineering, National Institute of Technical Teachers Training & Research (NITTTR), Chandigarh, India.
  • S.S. Dhami Professor, Department of Mechanical Engineering, National Institute of Technical Teachers Training & Research (NITTTR), Chandigarh, India

Keywords:

Box Behken Design, Heat affect zone (HAZ), Response Surface Methodology and Metal Inert gas welding.

Abstract

The present work is intended to optimize the existing MIG welding process parameters utilized by an industrial firm, which engaged in fabrication of generator set. The optimized process parameter will improve overall weld quality by achieving minimum heat affected zone (HAZ) on canopy of generator set. Design of experiment based on Box Behnken Design of Response Surface Methodology was developed in Design expert software, which was used for analysis of results.

Downloads

Published

2019-06-01

How to Cite

Kumar, R. ., & Dhami, . S. . (2019). Optimization of MIG welding process parameter for minimizing heat affected zone. International Journal of Technical Innovation in Modern Engineering & Science, 5(6), 370–381. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/1990

Issue

Vol. 5 No. 6 (2019): Vol. 5 No. 6: Volume 5 Issue 6 (June-2019)

Section

Articles