AN EXPERIMENTAL INVESTIGATION OF PARTIALLY REPLACEMENT OF CEMENT WITH GLASS POWDER AND FINE AGGREGATE WITH COPPER SLAG

Authors

  • Jaykumar K. Bhadania PG Student, Department of Civil Engineering, Darshan Institute of Engineering and Technology, Rajkot, Gujarat & Gujarat Technological University
  • Chetan G. Solanki Professor, Department of Civil Engineering, Darshan Institute of Engineering and Technology, Rajkot, Gujarat & Gujarat Technological University

Keywords:

Cement, Fine aggregate, Waste material, Glass powder, Copper slag, Compressive Strength, Tensile strength, Flexural strength

Abstract

Conventional concrete made by some ingredients like water, cement and aggregates. Day to day we need to improvement the property of concrete like strength, workability... For this improvement, we need to find some new alternative materials or find some chemical admixture or partial or full replacement of conventional material. In this experimental investigation, to study the effect of using glass powder and copper slag on the property of concrete. OPC53 cement replaced by waste glass powder and fine aggregate replaced by the copper slag. The range of replacement of glass powder with cement is 5% to 15% with an increment of every 2.5% and the range of replacement of copper slag with fine aggregate is 30% to 50% with an increment of every 5%. These all the mixes will be cast for M30 grade of concrete and tested for workability, compressive strength, tensile strength and flexural strength.

Downloads

Published

2021-11-28

How to Cite

K. Bhadania, J., & G. Solanki, C. (2021). AN EXPERIMENTAL INVESTIGATION OF PARTIALLY REPLACEMENT OF CEMENT WITH GLASS POWDER AND FINE AGGREGATE WITH COPPER SLAG. International Journal of Technical Innovation in Modern Engineering & Science, 5(3), 854–859. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/2587

Issue

Vol. 5 No. 3 (2019): Vol. 5 No. 3: Volume 5 Issue 3 (March-2019)

Section

Articles