ADVANCEMENT ON BIOMATERIAL IMPLANTS: A REVIEW

Authors

  • Amritbir Singh M.E. scholar, Department of Mechanical Engineering, National Institute of Technical Teachers Training and Research, (NITTTR), Chandigarh
  • P. Sudhakar Rao Assistant professor, Department of Mechanical Engineering, National Institute of Technical Teachers Training and Research, (NITTTR), Chandigarh
  • Rahul Bansal M.E. scholar, Department of Mechanical Engineering, National Institute of Technical Teachers Training and Research, (NITTTR), Chandigarh

Keywords:

Biomaterials, Biocompatibility, Surface Characteristics, Electric Discharge Machining

Abstract

The property modification plays a key role in coordinating with the intricacy of the biological system. Appropriate customized surface alteration can increase the surface characteristics and properties of the implants. This review article is promised to discuss the advancements of biomaterial implants done on the basis of surface characteristics, biocompatibility and physical properties. Change in the input parameters of non conventional machining to study its effect on Ti 6Al 4V and using selective laser sintering to produce CrCoMo alloys at different orientation results in the output that increases material removal rate and strength of the implant respectively. There is an ample scope of growth in working on implants of various types and performing various kinds of machining on it to enhance the biological as well as physical properties.

Downloads

Published

2019-05-01

How to Cite

Singh, A. ., Rao, P. S. ., & Bansal, R. . (2019). ADVANCEMENT ON BIOMATERIAL IMPLANTS: A REVIEW. International Journal of Technical Innovation in Modern Engineering & Science, 5(5), 1073–1077. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/2681

Issue

Vol. 5 No. 5 (2019): Vol. 5 No. 5: Volume 5 Issue 5 (May-2019)

Section

Articles

Most read articles by the same author(s)