A STUDY ON DESIGN ASPECTS OF REINFORCED EARTH WALL

Authors

  • Nida Nasir M.Tech student, Department of Civil Engineering, National Institute of Technology Kurukshetra,Haryana-136119, India
  • S.N. Sachdeva Professor, Department of Civil Engineering, National Institute of Technology, Kurukshetra, Haryana-136119, India

Keywords:

Reinforced Earth wall; Geogrid; stability checks; overturning; sliding

Abstract

The paper deals with the design of Reinforced Earth wall with Geogrid as reinforcing material at five different heights. The design of reinforced earth wall is based on lateral earth pressure approach. In this design active earth pressure has been calculated and the checks for internal and external stability, overturning, sliding, pullout, shear and connection strength also has been done. The height of the wall is taken up to maximum 10m. The comparison is done between the designs and the impact of change of height. The calculation for the design is done on Microsoft Excel to bring out the better alternative among them. The paper also carries out the importance of Reinforced Earth Wall in the transformation of modern construction.

Downloads

Published

2019-04-01

How to Cite

Nasir, N. ., & Sachdeva, S. . (2019). A STUDY ON DESIGN ASPECTS OF REINFORCED EARTH WALL. International Journal of Technical Innovation in Modern Engineering & Science, 5(4), 1150–1158. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/2918

Issue

Vol. 5 No. 4 (2019): Vol. 5 No. 4: Volume 5 Issue 4 (April-2019)

Section

Articles

Most read articles by the same author(s)