DESIGN OF AUTOMATIC HAND BRAKE APPLY WITH SPEED CONTROL BRAKING SYSTEM

Authors

  • J.Nandhakumari Assistant Professor Department of Mechanical Engineering, KGiSL Institute of Technology
  • M.Prekyath Ug scholar Department of Mechanical Engineering, KGiSL Institute of Technology
  • S.Subin Sudhakaran Ug scholar Department of Mechanical Engineering, KGiSL Institute of Technology
  • P.Sathish Kumar Ug scholar Department of Mechanical Engineering, KGiSL Institute of Technology
  • S.Rahul Ug scholar Department of Mechanical Engineering, KGiSL Institute of Technology

Keywords:

Pneumatic braking

Abstract

Automatic hand brake apply with speed control braking systems one the braking systems in automobile at
the time of vehicle turn off condition. This braking system is a pneumatically operated one. This project helps us to
apply the hand brakes when the key is taken out of the ignition slot. Again when the key is inserted the hand brakes
are released automatically. The control unit is receives the signal from the key switch. The key switch is ON at the
time of vehicle start condition. Also an emergency switch is provided in this system which helps at the time of critical
conditions. This project eliminates the necessary of applying hand brakes at all the time when the vehicle is parked.
Also a sensor is placed the vehicle senses continuously and in case of any emergency situation, the brakes and the
bumper activated automatically by the pneumatic systems.

Downloads

Published

2019-03-31

How to Cite

J.Nandhakumari, M.Prekyath, S.Subin Sudhakaran, P.Sathish Kumar, & S.Rahul. (2019). DESIGN OF AUTOMATIC HAND BRAKE APPLY WITH SPEED CONTROL BRAKING SYSTEM. International Journal of Technical Innovation in Modern Engineering & Science, 5(18), -. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/3273

Issue

Vol. 5 No. 18 (2019): ICRESET-2019 (International Conference on Recent Explorations in Science, Engineering and Technologies)

Section

Articles