Evaluation of Mechanical, chemical, Properties of Arhar filled Composites

Authors

  • L.SUDHEER KUMAR REDDY PG Research Scholar, Product design, Mechanical Engineering, JNTUA College of Engineering, Ananthapuramu, Andhra Pradesh, India
  • Dr.B.CHANDRA MOHANA REDDY Assistant Professor of Mechanical Engineering, JNTUA College of Engineering, Ananthapuramu, Andhra Pradesh
  • K.MANOHAR REDDY Research scholar of Mechanical Engineering, JNTUA College of Engineering, Ananthapuramu, Andhra Pradesh

Keywords:

Arhar fiber (filler type), Epoxy Resin AW106, Stress and strain

Abstract

Polymers providing their service to the society with their remarkablefeatureslike low-density, resistance to oxidation which leads to corrosion, low coefficient of friction, good mould capability&inexpensive. In the existing work epoxy resin ispreferred as matrix, Arhar flakes is preferred as reinforcement. Arhar is taken in the form of flakes & mixed with epoxy by using mechanical shear mixer, then placed in ultrasonicator for better scattering of Arhar flakes in the matrix. After this the composite is cured at room temperature. Different weights of Arhar flakes (5,10,15,20 gm wt.) has been to prepare the composite samples & same samples tested for mechanical properties. From the results of the mechanical properties, the Arhar flakes with 15gms epoxy composite samples showing the better values.

Downloads

Published

2018-09-12

How to Cite

REDDY, L. K. ., REDDY, D. M. ., & REDDY, K. (2018). Evaluation of Mechanical, chemical, Properties of Arhar filled Composites. International Journal of Technical Innovation in Modern Engineering & Science, 4(9), 91–99. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/492

Issue

Vol. 4 No. 9 (2018): Vol. 4 No. 9: Volume 4 Issue 9 (September-2018)

Section

Articles