UTILIZATION OF EPOXY RESIN AS A FILLER IN CONCRETE

Authors

  • Dhaval Ghaghretiya Student M. Tech Department of Civil Engineering R. K. University Rajkot
  • Asst. Prof. R. K. Shashanth Asst. Prof. Department of Civil Engineering R. K. University Rajkot

Keywords:

Epoxy Resin, Tensile strength, Compressive strength, Standard curing

Abstract

The objective of this research were to compare the split tensile strength and compressive strength of normal concrete and Epoxy Resin as filler in concrete. Specimen were tested for tensile strength and compressive strength after 7 days, 14 days and 28 days of standard curing in order to find out if concrete would show an increase in strength. Mix design used in this research work is based on previous
research work. The water-cement ratio, cement, aggregate all content were kept same except epoxy resin.

Downloads

Published

2018-10-12

How to Cite

Ghaghretiya, D. ., & Shashanth, A. P. R. K. . (2018). UTILIZATION OF EPOXY RESIN AS A FILLER IN CONCRETE. International Journal of Technical Innovation in Modern Engineering & Science, 4(10), 297–301. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/534

Issue

Vol. 4 No. 10 (2018): Vol. 4 No. 10: Volume 4 Issue 10 (October-2018)

Section

Articles