AUTOMATIC WATER PUMP CONTROL AND SYSTEM MONITORING BY USING INTERNET OF THINGS (IoT) TECHNOLOGY

Authors

  • S. Prasad P.G Scholar, JNTUA College of engineering, Ananthapuramu, A.P.
  • Dr. K. Prahlada Rao Professor &Rector of JNTUA College of engineering, Anantapuramu, A.P.

Abstract

The main purpose of an automated water pump system for home or any user needing it for filling tanks as well as for using water supply. The system consists of water sensor, temperature sensors and wifi module and GSM modem are controlled by PIC microcontroller. The user can manually send the sms commands to on/off the pump. Whenever the water comes and touches to the sensor, sensor sends the signal to the microcontroller and on the pump automatically .once water stop the pump will automatically off after 3 sec. The system consists of a float switch for checking water level, if tank fills the pump will automatically off. The tank
water reaches above 30o c the system now notifies the user that it has TEMP IS HIGH. The system also consistsof LED light to know the pump condition. The system information can be monitor through the ThingSpeak website

Downloads

Published

2018-08-22

How to Cite

Prasad, S. ., & Rao, . D. K. P. . (2018). AUTOMATIC WATER PUMP CONTROL AND SYSTEM MONITORING BY USING INTERNET OF THINGS (IoT) TECHNOLOGY. International Journal of Technical Innovation in Modern Engineering & Science, 4(8), 332–339. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/760

Issue

Vol. 4 No. 8 (2018): Vol. 4 No. 8: Volume 4 Issue 8 (August-2018)

Section

Articles