Design of textile based microstrip low pass filter

Authors

  • Falguni Raval Department C. S. Patel institute of technology, Charotar University of Science and Technology, Changa, Gujarat, India
  • Deep Chauhan Department C. S. Patel institute of technology, Charotar University of Science and Technology, Changa, Gujarat, India

Keywords:

lumped-element network, Microstrip low pass filter, Jeans, , High frequency structure simulator.

Abstract

The design of textile microstrip low pass filter is discussed in this paper. The filter is designed at 1GHz frequency. The lumped circuit model is simulated in student version of ansoft designer. The transmission line model of the filter is simulated in high frequency structure simulator. Jeans is used as dielectric substrate and copper adhesive tape is used to make conductive parts. The filter is fabricated and tested in network analyzer. There is little change in simulated and measured results that may be due to fabrication errors.

Downloads

Published

2021-11-20

How to Cite

Raval, F., & Chauhan, D. (2021). Design of textile based microstrip low pass filter. International Journal of Technical Innovation in Modern Engineering & Science, 4(6), 1138–1143. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/1868

Issue

Vol. 4 No. 6 (2018): Vol. 4 No. 6: Volume 4 Issue 6 (June-2018)

Section

Articles