EXPERIMENTAL INVESTIGATION OF MRR AND SURFACE FINISH USING ABRASIVE JET MACHINING OF TITANIUM ALLOY

Authors

  • MOKA ROJA Studying M.Tech, AMS branch in Pydha College of Enginnering, Patavala, Andhra Pradesh, India
  • V.V. RAMAKRISHNA Asst. Professor in Pydha College of Enginnering, Patavala, Andhra Pradesh, India

Abstract

In this report, we are doing different experimentations are being performed on Titanium alloy by changing the parameters like Sand Feed, Sand Speed, Stand Off Distance (i.e) Nozzle to work piece distance to determine the Material Removal rates & surface finish. Optimization is done using L9orthogonal array by using the Taguchi method to obtain the better parameters and to obtain maximum removal rates & minimum surface roughness. The parameters considered are Sand Speed 300rpm, 500rpm, 700rpm, Standoff Distance 1mm, 2mm, 3mm, and Feed 280mm/min, 400mm/min, 770mm/min.

Downloads

Published

2021-11-22

How to Cite

ROJA, M., & RAMAKRISHNA, V. (2021). EXPERIMENTAL INVESTIGATION OF MRR AND SURFACE FINISH USING ABRASIVE JET MACHINING OF TITANIUM ALLOY. International Journal of Technical Innovation in Modern Engineering & Science, 5(1), 297–303. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/2256

Issue

Vol. 5 No. 1 (2019): Vol. 5 No. 1: Volume 5 Issue 1 (January-2019)

Section

Articles