Air Flow Analysis of the Solar Plate Collector for Drying Process

Authors

  • T.A.Arun Assistant Professor Department of Mechanical Engineering, KGiSL Institute of Technology
  • S.Sathishkumar Ug scholar Department of Mechanical Engineering, KGiSL Institute of Technology
  • B.Nandhakumar Ug scholar Department of Mechanical Engineering, KGiSL Institute of Technology

Keywords:

Flat Plate Collector, Flow Express, Flow Analysis

Abstract

For drying process solar flat plate collectors are used to harness the solar energy. In order to harness more
solar heat energy from the solar flat plate collector the area of distribution of air flow inside the chamber must be
maximum in order to heat the air inside the chamber to maximum extent and going to analyse the air flow rate inside
the solar plate collector by using SOLID WORKS FLOEXPRESS ANALYSIS WIZARD in order to determine the
inlet outlet conditions which provide the required output. The conditions used to analyse the system are atmospheric
conditions at mass flow rate of 0.314 kg/s.

Downloads

Published

2019-03-31

How to Cite

T.A.Arun, S.Sathishkumar, & B.Nandhakumar. (2019). Air Flow Analysis of the Solar Plate Collector for Drying Process. International Journal of Technical Innovation in Modern Engineering & Science, 5(18), -. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/3282

Issue

Vol. 5 No. 18 (2019): ICRESET-2019 (International Conference on Recent Explorations in Science, Engineering and Technologies)

Section

Articles