IoT Based Soil Moisture and Temperature Monitoring Device for Irrigation Water Pump

Authors

  • Mude.Dhanunjaya Naik PG Research Scholar, Product Design, Mechanical Engineering, JNTUA College of Engineering, Ananthapuramu, Andhra Pradesh, India
  • Dr. Smt. G.Prasanthi Professor of Mechanical Engineering and Director, Industrial Relations & Placements and School of Continuing & Distance Education, JNTUA, Ananthapuramu, Andhra Pradesh, India

Keywords:

Arduino Microcontroller at mega 328, DHT11, PH sensor, Soil moisture sensor, Wi-Fi, and D C motor.

Abstract

The Water Scarcity is increasing very much in the drought prone area. So the consumption of water should be optimally done. The waste of water should be cut down very seriously. As our country is an irrigation based nation, much of the land is used for cultivation. The necessity of water is very essential. An attempt to cut down the wastage of irrigation water will be tried in the present project work the project aims in designing an IOT sensor system which will be capable of detecting the moisture level humidity and PH value of the soil. These sensors will be fixed at predominant positions of the fields. When the moisture level is sufficient,pump will be switched off. The heavy duty water motor pump operating for the fields will be provided with sensor for temperature detection. Increase in the surface temperature of the motor switches of the power supply thereby preventing the damage for motor winding.
Thus an attempt to stop water wastage and water pump damage will be made in this research work using the IOT technology.

Downloads

Published

2021-11-05

How to Cite

Naik, M., & G.Prasanthi, D. S. (2021). IoT Based Soil Moisture and Temperature Monitoring Device for Irrigation Water Pump. International Journal of Technical Innovation in Modern Engineering & Science, 3(10), 39–43. Retrieved from https://ijtimes.com/index.php/ijtimes/article/view/859

Issue

Vol. 3 No. 10 (2017): Vol. 3 No. 10: Volume 3 Issue 10 (October-2017)

Section

Articles