Archives | IJTIMES

Published Volumes & Issues

Browse all published issues of International Journal of Technical Innovation in Modern Engineering & Science. Click any issue card to view its papers inline.

Volume 12 2026

3 issues · 5 papers

Issue 1

(January - March) 2026

2 papers →

Issue 2

(April - June) 2026

2 papers →

Issue 3

(July - September) 2026

1 paper →

Volume 11 2025

4 issues · 11 papers

Issue 1

(January - March) 2025

3 papers →

Issue 2

(April - June) 2025

3 papers →

Issue 3

(July - September) 2025

2 papers →

Issue 4

(October - December) 2025

3 papers →

Volume 10 2024

5 issues · 13 papers

Issue 1

(January - March) 2024

2 papers →

Issue 2

(April - June) 2024

4 papers →

Issue 3

(July - September) 2024

1 paper →

Issue 4

(October - December) 2024

3 papers →

Issue 10

Issue 10 2024

3 papers →

Volume 9 2023

4 issues · 12 papers

Issue 1

(January - March) 2023

3 papers →

Issue 2

(April - June) 2023

2 papers →

Issue 3

(July - September) 2023

2 papers →

Issue 4

(October - December) 2023

5 papers →

Volume 8 2022

7 issues · 7 papers

Issue 2

(April - June) 2022

1 paper →

Issue 3

(July - September) 2022

1 paper →

Issue 4

(October - December) 2022

1 paper →

Issue 5

Issue 5 2022

1 paper →

Issue 10

Issue 10 2022

1 paper →

Issue 11

Issue 11 2022

1 paper →

Issue 12

Issue 12 2022

1 paper →

Volume 7 2021

10 issues · 15 papers

Issue 1

(January - March) 2021

3 papers →

Issue 2

(April - June) 2021

2 papers →

Issue 4

(October - December) 2021

1 paper →

Issue 5

Issue 5 2021

2 papers →

Issue 7

Issue 7 2021

1 paper →

Issue 8

Issue 8 2021

1 paper →

Issue 9

Issue 9 2021

2 papers →

Issue 10

Issue 10 2021

1 paper →

Issue 11

Issue 11 2021

1 paper →

Issue 12

Issue 12 2021

1 paper →

Volume 6 2020

12 issues · 80 papers

Issue 1

(January - March) 2020

7 papers →

Issue 2

(April - June) 2020

6 papers →

Issue 3

(July - September) 2020

8 papers →

Issue 4

(October - December) 2020

5 papers →

Issue 5

Issue 5 2020

8 papers →

Issue 6

Issue 6 2020

8 papers →

Issue 7

Issue 7 2020

4 papers →

Issue 8

Issue 8 2020

7 papers →

Issue 9

Issue 9 2020

7 papers →

Issue 10

Issue 10 2020

11 papers →

Issue 11

Issue 11 2020

7 papers →

Issue 12

Issue 12 2020

2 papers →

Volume 5 2019

19 issues · 1424 papers

Issue 1

(January - March) 2019

68 papers →

Issue 2

(April - June) 2019

59 papers →

Issue 3

(July - September) 2019

202 papers →

Issue 4

(October - December) 2019

202 papers →

Issue 5

Issue 5 2019

194 papers →

Issue 6

Issue 6 2019

111 papers →

Issue 7

Issue 7 2019

61 papers →

Issue 8

Issue 8 2019

39 papers →

Issue 9

Issue 9 2019

14 papers →

Issue 10

Issue 10 2019

4 papers →

Issue 11

Issue 11 2019

9 papers →

Issue 12

Issue 12 2019

6 papers →

Issue 13

Issue 13 2019

162 papers →

Issue 14

Issue 14 2019

56 papers →

Issue 15

Issue 15 2019

18 papers →

Issue 16

Issue 16 2019

46 papers →

Issue 17

Issue 17 2019

12 papers →

Issue 18

Issue 18 2019

142 papers →

Issue 19

Issue 19 2019

19 papers →

Volume 4 2018

13 issues · 1461 papers

Issue 1

(January - March) 2018

44 papers →

Issue 2

(April - June) 2018

22 papers →

Issue 3

(July - September) 2018

22 papers →

Issue 4

(October - December) 2018

64 papers →

Issue 5

Issue 5 2018

240 papers →

Issue 6

Issue 6 2018

251 papers →

Issue 7

Issue 7 2018

201 papers →

Issue 8

Issue 8 2018

157 papers →

Issue 9

Issue 9 2018

120 papers →

Issue 10

Issue 10 2018

92 papers →

Issue 11

Issue 11 2018

104 papers →

Issue 12

Issue 12 2018

114 papers →

Issue 13

Issue 13 2018

30 papers →

Vol.4, Issue 1 — (January - March) 2018 44 papers

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-3F8311

NONLINEAR STATIC ANALYSIS OF 3-D RC FRAMED ASYMMETRIC BUILDING WITH LEAD RUBBER ISOLATOR USING SAP2000V19

SAPPOGU GAZZANNA , Dr.E. ARUNAKANTHI · J N T U ANANTAPUR, IN

📄 View / Download PDF 📄 View Details

Abstract Many buildings in the present scenario have irregular configurations both in plan and elevation.This in future may be subjected to devastating earthquakes. So it is also necessary to enhance the seismic performance of asymmetric buildings by using seismic control techniques. In the present study a total of 9 models, asymmetrical in plan (L-shape) are taken for analysis to cover the broader spectrum of low, medium & high rise buildings for the seismic control of the structures using pushover analysis, two different techniques were considered such as lead rubber bearing isolator and masonry infill walls, the analysis has been carried out using SAP2000V19. The results of bare frame and other building models have been compared, the presence of lead rubber base isolator, top story drift get reduced as compared with masonry infill wall. The trend was found to be reversed for high rise buildings especially with the application of isolation systems due to the massive increase in the story displacements suggesting the ineffectiveness of the base isolators for high rise buildings successively the plastic hinge pattern formed after carrying out the pushover analysis was also studied which indicated that structural performance was considerably improved.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-FEAE51

DEVISE AND OPERATION OF GARBAGE SUPERVISION SCHEME BASED ON USING INTERNET

JATROTH SRINIVAS · Department of ECE, Ellenki College Of Engineering and Technology, India, IN

📄 View / Download PDF 📄 View Details

Abstract Particularly frequently, in our metropolis we see that the garbage boxes or dustbins placed at public areas are overloaded. It creates unhygienic stipulations for human beings in a identical fashion to ugliness to that neighbourhood leaving disagreeable scent. To hold a long way from all such stipulations we will put into results a institution more often than not known as IoT situated shrewd disposal of rubbish. On this mission dustbins are interfaced with microcontroller cantered computing device having Ultrasonic sensor and IR sensor on the part of tremendous instrument showing manufacturer new-day repute of garbage, on cellular web browser with html net internet web page by way of Wi-Fi. This instrument moreover entails gasoline sensor within it to preclude leakage of toxic gases from the area. Hence the fame most commonly updated right away to the html web web page. And the data detected can also be dynamically despatched to the complete stakeholders concerned within the system and it outcome within the optimized sequence routes of rubbish bin. Proper here the admirable operate gift is that we don't forget to furnish unfastened Wi-Fi for a person who's dumping the waste into the rubbish bin through relocating Wi-Fi code. It's extra most likely utilized through a person within the designated distance from the garbage bin. Essential part of our mission is dependent upon the going for walks of the Wi-Fi module, predominant for its implementation. The most important cause of this task is to slash human sources and efforts alongside aspect the enhancement of a wise town revolutionary and prescient.

Keywords: WIFI Module, Garbage bin, Gas sensor, Smart city, IR Sensor

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-2CF63D

EFFECT OF SKEW ANGLE ON PSC I GIRDER BY USING STAAD PRO

C S NAVEEN KUMAR , Dr E ARUNAKANTHI · M.Tech (Computer Aided Structural Engineering), Department of Civil Engineering, JNTUA College of Engineering, Ananthapuramu-515002, IN

📄 View / Download PDF 📄 View Details

Abstract The effect of a skew angle on single-span RC bridges and PSC bridges are analyzed by utilizing the grillage analysis & the results or outcomes are presented in this paper. Studies are carried out on pre-stressed concrete (PSC) bridge decks to study the influence of skew angle and type of loading. The grillage analysis results of skewed bridges are compared with that of reference to straight bridges for IRC Class A loading and Class 70R Tracked & Wheeled Vehicles. Also, comparative analysis of response of skewed PSC Slab Bridge decks with that of equivalent straight bridge decks is made. The variation of maximum longitudinal bending moment (BM), maximum transverse moment, maximum torsional moment and maximum longitudinal stresses with skew angles are studied for bridge deck replicas. The results obtained for Live load longitudinal bending moment’s decreases with an increase in skew angle, whereas a maximum transverse moment increase with an increase in skew angle & also maximum torsional moment increases with an increase in skew angle. The benefit of pre-stressing is reflected in considerable decrease in the longitudinal bending moment, transverse moment and longitudinal stresses. The whole structures or models are analysed with the help of STAAD Pro V8i Version.

Keywords: PSC bridge, IRC Class ‘A’ Loading, Class 70R Tracked and Wheeled Vehicles, Bending Moment, Torsional Moment, Transverse Moment and STAAD Pro V8i.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-932315

FAILURE CONTROL OF A SKYSCRAPER USING DIFFERENT METHODS OF RETROFITTING

K. Pavan Kumar , Dr.H. Sudarsana Rao, Dr. Vaishali. G. Ghorpade · M. Tech (Computer aided structural Engineering), Department of Civil Engineering, JNTUA College of Engineering, Ananthapuramu, Andhra Pradesh, 515002, India, IN

📄 View / Download PDF 📄 View Details

Abstract A skyscraper is a tall, continuously habitable building having multiple floors. The term was originally used to describe one of at least 35-50 floors, mostly designed for office, commercial and residential uses. A skyscraper can also be called a high-rise, but the term skyscraper is often used for buildings higher than 50 m (164 ft). One common feature of skyscrapers is having a steel framework that supports curtain walls. These curtain walls either bear on the framework below or are suspended from the framework above, rather than loadbearing walls of conventional construction. The load a skyscraper experiences is largely from the force of the building material itself. In most building designs, the weight of the structure is much larger than the weight of the material that it will support beyond its own weight. In technical terms, the dead load, the load of the structure, is larger than the live load. The basic principles of design for vertical and lateral loads (wind & seismic) are the same for low, medium or high rise building. But as building gets high, both vertical & lateral loads become controlling factors. The vertical loads increase in direct proportion to the floor area and number of floors. In contrast to this, the effect of lateral loads on a building is not linear and increase rapidly with increase in height. Due to these lateral loads, deflection & moments on steel components will be very high. By retrofitting the structure, these types of failures can be controlled. In the present analysis, a skyscraper with 40 floors has been analyzed. It is tested by different methods of retrofitting like shear walls, bracings and friction dampers at different locations. The building is considered on medium soil and analyzed in all the four zones (II, III, IV,V). Storey Shear, Moment, Torsion, Drift and Lateral Load have been compared for all the cases. A commercial package, ETABS has been used for analyzing the skyscraper of 120m height and for different zones. The results are presented using tables & graphs and the most optimized solution is found out.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-B007F6

EFFECT OF DIAPHRAGM DISCONTINUITY IN THE SEISMIC RESPONSE OF MULTI-STOREY BUILDING

J. Sreenath , Dr.H.Sudharsana Rao, Dr.Vaishali.G. Ghorpade · M. Tech (Computer aided structural Engineering), Department of Civil Engineering, J.N.T.U.A College of Engineering, Anantapur , Ananthapuramu,515002, Andhra Pradesh, India, IN

📄 View / Download PDF 📄 View Details

Abstract Many buildings in the present scenario have irregular configurations both in elevation and plan. These in future may be subjected to devastating earthquakes. It is necessary to identify the performance of the structures to withstand against disaster for both new and existing buildings. Now a day’s opening in the floors is common for many reasons like stair cases, lighting architectural etc., These openings in diaphragms cause stresses at discontinuous joints with building elements. Discontinuous diaphragms are designed without stress calculations and are thoughtabout to be adequate ignoring any gap effects. In this paper an attempt is made to try to know the difference between a building with diaphragm discontinuity and a building without diaphragm discontinuity. This present paper makes a humble effort to portrait the behavior of the five different multi storied buildings with diaphragm openings under response spectrum analysis using ETABS v 9.7.4 To achieve this objective, various models with varying diaphragm openings were analyzed and compared for seismic parameters like maximum dead load, base shear, maximum storey drifts, and response spectrum results

Keywords: Diaphragm Discontinuity, Response spectrum Analysis, Maximum Dead Load, Base Shear, Maximum Storey Drifts.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-9C5479

NUMERICAL INVESTIGATIONS ON SUPERSONIC FLUID FLOW BEHAVIORS PAST A CAVITY CONCERNING VELOCITY FIELD AND AEROACOUSTIC INFLUENCES WITH LES-APPROACH

Dr. Nirmal Kumar Kund · Associate Professor, Department of Production Engineering Veer Surendra Sai University of Technology, Burla 768018, India, IN

📄 View / Download PDF 📄 View Details

Abstract A suitable numerical model is developed to predict supersonic flow pertaining to a 3D open cavity. The researches of supersonic flow over the 3D cavity having length-to-depth ratio of 2, include the supersonic free-stream Mach number of 2 and the flow Reynolds number of 105. The numerical simulation has been done with the Large Eddy Simulation (LES) approach. The Smagorinky model is introduced for the present investigation. The results found have been compared with the numerical simulation predictions available in the literature. The results have been expressed in the form of both coefficient of pressure (Cp) and overall sound pressure level (OASPL) along the side wall of the open cavity. The coefficient of pressure along the side wall of the said cavity appears to be very much comparable both qualitatively and quantitatively with the reported numerical results by the other investigator. Nevertheless, the overall sound pressure level along the side wall of the stated cavity is over-predicted by nearly 25-40 dB between the aft and front walls. Above and beyond, the velocity vector pertaining to the open cavity has also been investigated. Fairly large recirculation is witnessed inside the cavity and therefore these need to be supressed. Besides, the amalgamation of a spoiler is also planned for future to alter the flow structures inside the cavity which can bring about the reduction in recirculation in addition to the overall sound pressure level along the side wall of the open cavity.

Keywords: Numerical, Cavity, LES, Coefficient of Pressure, OASPL, Side Wall

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-8B8703

“Effect of Vertical Geometric Irregularity on Flat slab system with Response spectrum Analysis”

Mahesh kumar Patidar , Prof. Ravi Dwivedi, Prof. Niraj Soni, Anshuman Nimade · Malwa institute of science & technology, indore., IN

📄 View / Download PDF 📄 View Details

Abstract Steel structures today are edging towards the end of their design life. The increase of the urban population desires to construct big prestigious buildings for residence and business cause. The development of multi-storey building and big span structures is becoming a vital a part of our living style. Seismic evaluation is a subset of structural evaluation and is the calculation of the reaction of a structure to earthquakes. The prevailing goal of this work is to examine the numerous parameters like base shear, story displacement and story drift & stresses performing on flat slab system. Analysis of the large systems built the usage of flat slab in rectangular shape layout will be carried out with the help of Staad pro 2007 software via using is 456-2000Code. The main objective of the analysis is to study the behaviour of flat slab system in geometric vertical irregular multi-storied steel building against different forces acting on it during earthquake. The analysis is carried out using STAAD Pro2007 software. Steel structure frame with R.C.C flat slab without drop, steel column with I section & steel cantilever Beam with T section for vertical irregularity are modeled and analyzed for the dynamic loading. The analysis is made between Steel frame flat slab structure of G+10 story 150 %, 200%, 300% & 600% vertical irregular building with center, right & left edge positions. Response spectrum analysis results provide a more realistic behaviour of structure response and hence it can be seen that the displacement values in X directions are least in model with vertical irregularity in center when compared to all other models. Analysis of 150% 200%, 300% & 600% irregular building from center, left edge & right edge position with flat slab system in steel frame and results are carried out. It’s concluded that the flat slab vertical geometric irregular Structure at the center position with mass irregularity 200% is more sustainable for the effect of dynamic load on the performance of building as compare to other cases of irregularity in present study. Comparison in made between principal stresses, von mis stresses, tresca stresses & shear stresses in flat slab system, bending moment, node displacement, peak storey shear, Story drift & the result are brought out.

Keywords: Flat slab, Response Spectrum Analysis, Geometric Vertical Irregularity

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-52B039

NUMERICAL MODELLING FOR STUDIES ON SUPERSONIC FLOW OVER A CAVITY WITH SPOILER INVOLVING VELOCITY FIELD AND OVERALL SOUND PRESSURE LEVEL BY LES-APPROACH

Dr. Nirmal Kumar Kund · Associate Professor, Department of Production Engineering Veer Surendra Sai University of Technology, Burla 768018, India, IN

📄 View / Download PDF 📄 View Details

Abstract The present investigation pertains to the development of an appropriate numerical model for the supersonic flow over a 3D cavity with a length-to-depth ratio of 2. The Mach number of the supersonic free-stream is 2 in addition the Reynolds number of the flow is 105. The numerical simulations have been conducted by means of Large Eddy Simulation (LES) method. The Smagorinky model is introduced for this research. The numerical predictions have been expressed in the form of velocity vector as well as overall sound pressure level along the side wall of the open cavity. As witnessed, the velocity vector superbly describes the flow behaviour inside the cavity. Very large recirculation is also noticed inside the cavity without spoiler. Nevertheless, the reduction of the recirculation inside the cavity is realized by introducing a spoiler in the form of one-fourth of a cylinder at the leading edge of the open cavity. With the introduction of the spoiler, the overall sound pressure level along the side wall of the cavity is also decreased to certain level. Correspondingly, the sound pressure levels get decreased by almost 14 dB and 12 dB at both front and aft walls of the cavity, respectively. The alterations in the flow characteristics of the cavity along with the spoiler is also examined. In general, the comparisons between the simulation predictions of the cavity flows with and without the use of the spoiler is also made

Keywords: Numerical Simulation, Open Cavity, Spoiler, LES, Velocity Vector, OASPL.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-A4CD3E

Effect of Tool Speed and Feed on Tensile Properties of Friction stir welded AA6063-T4 alloy

Ch. Radhika , N. Shyam Kumar · Assistant Professor ,University College of Engineering Kakatiya University, Warangal, TS India, IN

📄 View / Download PDF 📄 View Details

Abstract In present work friction stir welds (FSW) of 3 mm thick AA 6063-T4 aluminium alloy were prepared at different speeds and feeds. The welding parameters were considered in order to achieve non-defective welds. The welds produced were classified as ‘‘hot welds” and ‘‘cold welds”. The cold welds, obtained with the minimum tool rotational speed and maximum traverse speed. Cold welds have improved mechanical properties relative to the hot welds that were in under match condition relative to the base material. The tensile strength and hardness properties are found by experiments at three different speeds and feeds. The results are analysed

Keywords: FSW , Aluminum alloy , hot welds, cold welds, brinnels hardness, Tensile strength

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-AC516F

Online Examination Form System for J&K State Board of Technical Education

Shakeel Ahmad Dar · IT Cell Incharge, J&K State Board of Technical Education, IN

📄 View / Download PDF 📄 View Details

Abstract Examination Conduction, Evaluation and Certification at Polytechnic and ITI levels in the state of Jammu and Kashmir are the primary and core responsibilities of J&K State Board of Technical Education. Examination Process starts with the process of Examination Form Submission, then the process of Roll Number Assignment to eligible Students, then the actual process of examination and finally culminates in Evaluation, Result Processing and Result Declaration. The Examination Form Submission like all other processes of J&KSBOTE used to be manual and hence more prone to errors and extremely time consuming. To improve efficiency in terms of cost and time, an Online Examination Form Submission is developed which not only reduces the number of errors but also simplifies the entire system.

Keywords: The Jammu and Kashmir State Board of Technical Education (JKSBOTE); Data base; Model; User interface. Examination Form Submission System,

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-40A922

ANN model development for Rainfall-Runoff Modelling.

Lateef Ahmad Dar · National Institute of Technology, Srinagar, India, IN

📄 View / Download PDF 📄 View Details

Abstract The Artificial Neural Network (ANN) approach has been successfully used in many hydrological studies especially the rainfall-runoff modelling. This study deals with a detailed description of development of Artificial Neural Network models. The various aspects of the model development and the processes undergoing to develop those models are discussed in this study.

Keywords: Artificial Neural Networks (ANNs); Rainfall-Runoff Process

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-F90A56

POWER-ELECTRONICS BASED EFFICIENT ENERGY MANAGEMENT SYSTEM WITH FUZZY LOGIC CONTROLLER

D. SUBBARAYUDU , SHAIK HUSSAIN VALI · M.Tech, JNTUA College of engineering, pulivendula, A.P, India. Space of interest electric power System., IN

📄 View / Download PDF 📄 View Details

Abstract This paper exhibits about utility of a power electronics based energy management system (EMS), it incorporates storage devices and a rigorously managed single-stage voltage source inverter, that may be controlled as a current source or voltage source contingent upon the standing of the ac grid and also the client's inclination. The EMS ensures fundamental burdens are burning once ac system flops; in that condition, The VSI is restricted as a voltage source. This likewise finishes peak management by providing supply from storage device to the neighborhood masses whereas they're controlled by the ac grid if the lots get large. Power price reserve funds achieved by high shavings are calculated. The management engineering and principle put in this paper are talked regarding thoroughly.

Keywords: Crest power management, Fuzzy controller, Energy management system, energy storage, voltage source inverter(VSI).

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-6EBC7B

ENCODE RECORD MARK THE EFFICIENCY OF DECIMAL MULTIPLICATION PROBE

Mrs. CHANDANA. C , Mr. E. AMARESWAR · ASSISTANT PROFESSOR, Dept of ECE, St.MARTIN’S ENGINEERING COLLEGE DHULAPALLY, NEAR KOMPALLY, SECUNDERABAD, T.S, INDIA, IN

📄 View / Download PDF 📄 View Details

Abstract Decimal X×Y multiplication is a complex operation, where intermediate partial products (IPPs) are generally selected from a hard and fast of pre-computed radix-10Xmultiples.Some works require best [0,5]×Xvia recoding digits of two at the least once-hot illustration of signed digits in [−5,5]. This reduces the selection common sense on the price of one greater IPP. Two’s complement signed-digit (TCSD) encoding is frequently used to symbolize IPPs, in which dynamic negation (thru one xor in step with little little bit of X multiples) is needed for the recoded digits of Y in [−5,−1].In this paper, however a era of 5IPPs, for four-digit operands, we control to start the partial product discount (PPR) with five IPPs that enhance the VLSI regularity. Moreover, we keep seventy-five % of negating xors thru representing pre-computed multiples thru signal-significance signed-digit (SMSD) encoding. For the Primary-diploma PPR, we devise an green adder, with SMSD input numbers, whose sum is represented with TCSD encoding. Thereafter, multilevel TCSD 2:1 discount consequences in TCSD accumulated partial merchandise, which together go through a unique early initiated conversion scheme to get on the very last binary-coded decimal product. As such, a VLSI implementation of four×four-digit parallel decimal multiplier is synthesized, in which reviews display some overall performance improvement over previous relevant designs.

Keywords: SMSD, TCSD, X Multiplies, Decimal Multiplier, Synthesized circuit

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-FE8A6B

ALTERNATIVE SIMILAR DROPPING APPROACH ENABLES SIGNIFICANT POWER DURING LOGIC-BASED SCANNING

Mrs. Pushpa P , Mr. P Ramesh · ASSISTANT PROFESSOR, Dept of ECE, St.MARTIN’S ENGINEERING COLLEGE DHULAPALLY, NEAR KOMPALLY, SECUNDERABAD, T.S, INDIA, IN

📄 View / Download PDF 📄 View Details

Abstract The technology of huge power hunch during at tempo look at achieved via the use of not unusual sense BIST. We have noted in two techniques to lessen the PD generated at capture at some point of an at-pace look at of combinational and sequential circuits with experiment-primarily based totally Logic BIST using the Launch-On-Shift scheme. Both techniques growth the correlation among adjacent bits of the test chains with respect to traditional test-based totally definitely LBIST. First technique hereinafter referred to as Low-Cost Approach (LCA), allows a reduction in the worst-case significance of PD throughout traditional logic BIST.LCA functions a similar AF within the test chains at seize even as requiring lower test time and location overhead. The 2d approach, hereinafter known as High-Reduction Approach, allows scalable PD discounts at capture, with restrained additional costs in phrases of place overhead and amount of required check vectors for a given goal FC, over our LCA method. HRA lets in an extensively decrease AF inside the test chains at a few levels in the software program of look at vectors. The proposed method of ring oscillator and convey hold adder is used. The trying out method is done in combinational common sense of convey save adder. So, we need to lessen power slump and calculate the electricity, location and delay.

Keywords: Adaptive control, low voltage ride through(LVRT), photovoltaic (PV) power systems, power system control, power system dynamic stability

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-B7CB69

MICROFIRESPACE BASED ON PROCESS TECHNOLOGIES FOR SMART BUILDINGS

Swathi Kambhampati , M Srinivas Reddy · Associate Professor, Dept of Electronics and Communication Engineering, St.Martin's Engineering College, Dhulapally, Hyderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract Micro-area is the method of locating any entity with a totally excessive accuracy (possibly in centimeters) at the identical time as geofencing is the method of making a digital fence round a Point of Interest (PoI). In this paper, we present an belief into various micro-place enabling technologies, strategies and services. We additionally communicate how they could boost up the incorporation of Internet of Things (IoT) in clever houses. We argue that micro-region based vicinity aware answers can play a full-size function in facilitating the tenants of an IoT organized the clever constructing. Also, such advanced technologies will permit the clever constructing control gadget thru minimal actions completed with the aid of the tenants. We also spotlight the present and predicted services to be supplied with the useful resource of the use of microlocation permitting technologies. We describe the annoying situations and suggest a few functionality solutions such that microlocation permitting era and services are very well integrated with IoT prepared clever building.

Keywords: Micro location, IOT, Organization, Services, Smart Building, Integrated circuit.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-1F6352

MY SECURITY MY CHOICE CONTROL FROM CLAIMING PHOTOGRAPH IMPARTING LOOKING INTO WEB SOCIAL NETWORKS

BUGGA SHIVAJI , N PUSHPALATHA · PG SCHOLAR, DEPT OF CSE, MARRI LAXMAN REDDY INSTITUTE OF TECHNOLOGY & MANAGEMENT, DUNDIGAL(V), QUTHBULLAPUR (MD), HYDERABAD-500043., IN

📄 View / Download PDF 📄 View Details

Abstract Photograph offering may be an engaging trademark which popularizes looking into line social networks. Unfortunately, it might spill users' privations assuming that they're permitted to set up, remark, and tag a picture uninhibitedly. In this paper, we strive will manage this issue and examine In those situation same time an individual stocks a photograph holding people separated from him/her (termed co-photo to brief). Will forestall feasible privations spillage for an image, we configuration an instrument with empower Each individual to An photograph a chance to be privy of the presenting movement What's more partake inside the choice making on the picture presenting. For this purpose, we need a proficient facial Ubiquity machine that might comprehend everyone in the photograph. However, that's only the tip of the iceberg traumatic security setting might likewise limit the amount of the portraits publicly to make required to show those FR machine. Should adapt to this quandary, our component tries on aggravate utilization of users' individual portraits to design an altered FR framework primarily prepared to recognize feasible photo co-owners without spilling their protection.

Keywords: online social networks, FR system, open social, privacy, homomorphism encryption.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-AAA3F8

A LEIGHTWEIGHT SECURE INFORMATION SHARING PLAN FOR PORTABLE DISTRIBUTED COMPUTING

VAITLA NARENDER , Y APPARAO · PG SCHOLAR, DEPT OF CSE, MARRI LAXMAN REDDY INSTITUTE OF TECHNOLOGY & MANAGEMENT, DUNDIGAL(V), QUTHBULLAPUR (MD), HYDERABAD-500043, IN

📄 View / Download PDF 📄 View Details

Abstract Cloud has been around for two decades and it comprises of the tremendous measure of information from everywhere throughout the world. The vast majority of the general population at an individual level and association level has moved their information to the cloud and offer information over all around the globe. The primary test looked by everybody is to share the information everywhere throughout the world or at authoritative level safely without giving endlessly the critical information to any exploiters. To defeat the test to share the information safely finished the cloud, a productive information encryption calculation for encoding information before sending it to the cloud. In this proposed we are utilizing a blend of Attribute-Based Encryption and Byte Rotation Encryption Algorithm for encoding the information before sending it to the cloud

Keywords: Cloud Computing, Data Privacy, Encryption, Data Sharing.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-9748D9

ARCHITECTURE EFFICIENCY IN DUAL ZONE MODE DOUBLE PRECISION FLOATING POINT SECTION

G Ramesh Reddy , T Kalyani · Associate Professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dulapally, Secunderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract Floating factor department is a centre range crunching extensively utilized as a part of logical and building packages. This paper proposed engineering for twofold precision floating point department. This engineering is meant for double mode usefulness, that can either check in on a couple of twofold precision operands or on two units of single precision operands in parallel. The engineering depends on the arrangement improvement multiplicative method of mantissa calculation. For this, a singular dual mode Radix-four Modified Booth multiplier is planned, which is applied iteratively in the design of double mode mantissa calculation. Other key components of floating factor division circulation, (as an instance, using oneidentity, left/right specific shifters, adjusting, and so on.) are moreover re-intended for the double mode operation. The proposed double mode engineering is orchestrated utilising UMC 90nm innovation ASIC execution. Two sorts of proposed layout are exhibited, one with single stage multiplier and any other with two section multiplier. Contrasted with an independent twofold precision division layout, the proposed double mode engineering requires 17% to 19% additional gadget belongings, with 3% to five% length overhead. In comparison with in advance craftsmanship in this, the proposed design out-plays them concerning required vicinity, generation and throughput.

Keywords: Radix-4, Required area, Power, Floating, Multiplier, Craftmanship

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-4ED28A

FIRE ALARM SYSTEM AND VALIDATION OF WERTHER’S PROCESS TECHNIQUES USING B3 BERRIES

Mrs.Bandari Theja , Mr. Ch.Uma Shankar · Assistant Professor, Dept of ECE, St.Martin’s Engineering College Dhullapally, Medchal, Hyderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract Safe from Fire is a clever self-managed smart hearth extinguisher device assembled with more than one sensors, actuators and operated by way of micro-controller unit. It takes enter alerts from numerous sensors positioned in one of a kind position of the monitored location and combines integrated fuzzy common sense to pick out fireplace breakout locations and severity. Data fusion set of rules facilitates the gadget to discard misleading fire conditions together with: cigarette smoke, welding etc. During the hearth hazard, SFF notifies the fireplace service and others by text messages and Smartphone calls. Home safety and automation are becoming an increasing number of outstanding functions on cellular gadgets. The intention of this paper is to design and put into effect low cost, flexible and speedy tracking home safety system using Raspberry Pi with GSM era. The system is designed to discover housebreaking; the photograph of a person is captured with the aid of digicam and sends to cellular and e-mail in addition to alarm receives on; and leaking in dangerous fuel, the smoke due to the fireplace as such suspicious interest is detected. Also, the consumer can set off all the alarm system at the same time as going out of doors through the mobile. The messenger has the feasibility of activating and deactivating the alarm gadget with the extra control for some home appliances switching the use of relays.

Keywords: Relays, Fire sensor, factor, GSM, Raspberry pi, Controller.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-BEDB94

INFERENCE AND COMBINATION OF NOISE IMAGE AND HAZE THE INDEPENDENT NON-IDENTICAL GAUSSIAN

K. RAJU , P.HARI BABU · Associate professor, Electronics and Communication Engineering St.Martin’sEngineering College, Dhulapally, Near Kompally, Hyderabad, Telangana 500014, IN

📄 View / Download PDF 📄 View Details

Abstract We present a green method for high pleasant non-blind deconvolution based on using sparse adaptive priors. Our regularization term enforces upkeep of robust edges whilst getting rid of noise. We model the image-earlier deconvolution problem as a linear gadget, that's solved within the frequency domain. Our approach’s clean method lends to a simple and green implementation. We show its effectiveness by means of appearing an extensive comparison with present non-blind deconvolution strategies, and by means of the use of it to deblur real pictures degraded by means of digicam shake or movement. Our experiments show that our answer is quicker and its results generally tend to have higher top sign to-noise ratio (PSNR) than the latest strategies. Thus, it gives an attractive alternative to carry out brilliant non-blind deconvolution of huge photos, as well as for use as the final step of blind deconvolution algorithms.

Keywords: deconvolution, Noise, PSNR, Image conversion, Blind.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-FB49D4

NOVEL EXPLANATION AND LOAD SCHEME TO STEADILY TRANSMIT DERIVATION FOR SENSOR NETWORKS

1RESHMA BEGUM. SHAIK , P.HARI BABU · Assistant professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally, Near Kompally, Hyderabad, Telangana 500014., IN

📄 View / Download PDF 📄 View Details

Abstract In our work we suggest a new lightweight method to strongly convey attribution for sensor data. In the modern times, recent has highlighted the important contribution of attribution within systems where usage of unreliable data might cause disastrous failures. Attribution is to be traced for every packet, however essential challenges will arise because of fixed storage, energy as well as bandwidth limits of sensor nodes as a result, it is essential to develop a light-weight attribution solution by means of low overhead. It is necessary to deal with security needs for instance privacy, truthfulness as well as originality of attribution and our goal is to devise an attribution encoding as well as decoding method that assures protection as well as performance requirements. The proposed method will depend on in-packet Bloom filters to fix attribution. Bloom filters make well-organized usage of bandwidth, as well as yield small error rates in practice.

Keywords: Attribution, Lightweight method, Encoding, Sensor nodes, Bandwidth, Bloom filters, Security.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-66F6A1

THE DESIGN AND IMPLEMENTATION OF AN AUTOMATED LIQUID OBSERVATION AND CONTROLLING MECHANISM UTILIZING AN AFFORDABLE LIQUID SENSOR AND MICROCONTROLLER

T. SOWMYA , P.HARI BABU · Assistant professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally, Near Kompally, Hyderabad, Telangana 500014., IN

📄 View / Download PDF 📄 View Details

Abstract During latest years due to the technological advancements many state-of-the-art strategies has been developed for assuring fast restoration of the sufferers in hospitals. For suitable affected person care in hospitals, assessment and management of patient’s fluid and electrolyte need is the most fundamental factor required. All most in all health centre, a help/nurse is liable for monitoring the IV fluid stage continuously. But unfortunately during maximum of the time, the observer may neglect to change the saline bottle at accurate time because of their busy time table. This may additionally results in several problems to the patients along with backflow of blood, blood loss and so forth. To overcome this critical state of affairs, a low cost RF based automatic alerting and indicating tool is proposed in which IR sensor is used as a stage sensor. It is based totally at the principle that the IR sensor output voltage degree adjustments when intravenous fluid stage is under certain limit. Sophisticated health tracking systems have become developed with the help of electronic components together with sensors, PLC, microcontrollers etc. With clean interfacing. This paper especially makes a speciality of presenting superior saline degree tracking device. The concept is to provide price powerful, dependable and automated saline glide monitoring machine which can be without difficulty applied in any medical institution and can be smooth for doctors in addition to nurses to display the saline go with the flow from a distance.

Keywords: Adaptive control, low voltage ride through(LVRT), photovoltaic (PV) power systems, power system control,power system dynamic stability.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-7DFDA2

REPEATED MULTIPLICATION OF THE RE-CONFIGURATION OF VEGAS

Ms. M. Mounika , Mr. Ch. Umashanker · Assistant Professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally,Near Kompally, Secunderabad, IN

📄 View / Download PDF 📄 View Details

Abstract This work introduces a new heuristic to generate pipelined run-time reconfigurable constant multipliers for FPGAs. It produces outcome very nearly the most pleasurable. It's founded on a best algorithm which fuses already optimized pipelined steady multipliers generated with the help of a current heuristic known as RPAG. Switching between nice single and multiple regular outputs is realized with the help of the insertion of multiplexers. The heuristic searches for an answer this final result in minimal multiplexer overhead. Utilising the proposed heuristic reduces the run-time of the fusion procedure, which raises the usability and application discipline of the proposed process of run-time reconfiguration. An extensive evaluation of the proposed method confirms a FPGA useful resource reduction on usual compared to previous work. For reconfigurable a couple of constant multiplication, useful resource financial savings may also be proven in comparison with an average long-established LUT multiplier. Two low stage optimizations are furnished, which further lower priceless resource consumption and are incorporated into an automated Verilog HDL code generation headquartered on the FloPoCo library. The quantity of filter occasions for reconfiguration is best confined by means of the block reminiscence of the FPGA which without doubt enables hundreds of firstrate configurations. The proposed reconfigurable structure consumes 16% so much less slices on traditional than a fixed coefficient DA filter generated by using utilizing Xilinx Coregen. In view that the direct mapping to CFGLUTs results in invalid filter output throughout reconfiguration, an substitute structure is proposed which avoids this issue on the price of 19% extra slice property on ordinary. Making use of a parallel reconfiguration scheme, reconfiguration times of a couple of hundred ns could be completed.

Keywords: FPGA, LUX, HDL, Multipliers, Xlinx, Ordinary.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-8F3AEB

THE FACE BY DEMONSTRATION AND LEARNED ON FEATURE-RICH VIDEO FRAMES

V.V.Ramana Rao , T. Anuradha · Associate Professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally, Hyderabad, Telangana-500014, IN

📄 View / Download PDF 📄 View Details

Abstract This work explores, for the main time, utilizing this contextual know-how, as individuals with wearable cameras stroll throughout precise neighbourhoods of a metropolis, with the intention to study a rich characteristic representation for facial attribute classification, without the steeply-priced instruction manual annotation required with the aid of utilizing prior procedures. Via monitoring the faces of informal walkers on more than forty hours of selfish video, we're organized to quilt tens of thousands of different identities and mechanically extract nearly 5 million pairs of pix linked by way of or from exact race tracks, together with their climate and neighbourhood context, underneath pose and lighting fixtures editions. These snapshot pairs are then fed correct right into a deep community that preserves similarity of snapshots associated by way of the identical track, with the intention to seize identification-related attribute points, and optimizes for area and climate prediction to seize additional facial attribute facets. Subsequently, the community is excellent-tuned with manually annotated samples. We perform a broad experimental analysis of wearable knowledge and two traditional benchmark datasets headquartered on net pics (LFWA and CelebA). Our method outperforms with the aid of a significant margin a community educated from scratch. Moreover, even without making use of manually annotated identification labels for pre-training as in prior methods, our procedure achieves a final result which may also be higher than the cutting-edge.

Keywords: Adaptive control, low voltage ride through(LVRT), photovoltaic (PV) power systems, power system control,power system dynamic stability

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-AB14ED

EFFECT OF URBANIZATION ON GROUND WATER

Mehnaza Akhter · Department of Civil Engineering, NIT Srinagar, J&K, India, IN

📄 View / Download PDF 📄 View Details

Abstract Water resources are under extreme pressure due to the burgeoning human population and rapid urbanization across the world. Urbanization in India is occurring at a rate faster than any other developing country. The planning commission of Govt of India estimates that 40% of country’s population will be residing in urban area by 2030.In India, urban population grows more rapidly than rural population. Increase in the population during the last 50 yrs has led to rapid industrialization and high rate of urbanization which have created tremendous pressure on natural resources like land, air and water. Scientists estimate groundwater accounts for more than 95% of all fresh water available for use. Urbanization can decrease recharge opportunity decrease soil storage and cause low flows Ground water contamination occurs due to Improper dumping of contaminants in urban areas. Hence we need to preserve the quality and quantity of ground water to minimize the ill effects of polluted water.

Keywords: Urbanization; Ground Water; Recharge; Population; Sources.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-E68AA6

SOCIAL COLLECTIVE-MODEL DIFFERENCE PRECISE RESEARCH WITH APP FOR RETRIEVAL OF IMAGE

B. Annapurna , Ch.Uma Shanker · Assistant Professor, Dept of ECE, St.Martin’s Engineering College Dhulapally, Secunderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract We present a singular framework of internet Multimodal Distance Metric Learning, whatever concurrently learns optimal poetry on every individual modality and also the optimal mixture of the poetry starting with a couple of modalities via efficient and elastic electronically connected schooling this paper investigates a singular framework of internet Multi-modal Distance Metric Learning, whichever learns length poetic rhythm beginning at multi-modal memorandums or a couple of sorts of puss amidst a good and plastic operative acquirements project. OMDML takes benefits of accessible information approaches for prime quality and scalability with respect to packed training tasks. Like a Doric well known accessible acquirements capacity, the Perceptions specifications commonly updates the model amidst the reinforcement of an entering specify with a consistent magnitude on every occasion it's misclassified. Although a variety of DML design have been propounded in summary, so much current DML methods normally fit in including single modal DML since the they familiarize yourself amidst a size metrical each of two on unusual of mark or at the joined innovation while really by concatenating more than one varieties of differing mien in combination. To lend a hand impair the computational value, we recommend a minimal-rank Online Multi-modal DML rote, whichever avoids the need of action all-out real semi-definite projections and forasmuch as saves loads of computational rate for DML on highdimensional results.

Keywords: OMDML, Content-based image retrieval, multi-modal retrieval, distance metric learning, online learning, low-ranking.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-1C2045

LOG -RELIABILITY -RATEO BASED SEQUENTIAL MENU CANCELLATION OF POLAR DECODING WITH MULTIBIT RESOLUTION

Mr.K. Karthik , Ms.T. Anuradha · Assistant Professor, Dept of ECE St.Martin’s Engineering College, Dhulapally, Secunderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract Considering that of their potential mission property, polar codes have grew to be out to be a standout amongst practically the most attractive channel codes. To this point, the progressive cancelation file (SCL) unravelling calculation is the major approach which may be detailed amazing mistake revising execution of polar codes. On the other hand, the equipment outlines of the fundamental SCL decoder have large silicon territory and lengthy unravelling idleness. Even though some gift endeavours can reduce either the territory or idleness of SCL decoders, these two measurements however can't be evolved in intervening time. This paper, curiously, proposes a fashioned log-threat share (LLR)-headquartered SCL disentangling calculation with the multi-bit option. This new calculation alluded as LLR-2K bSCL, can come to a resolution 2K bits at the same time for subjective happy with the utilization of LLR messages. What's more, a diminished expertise width plot is flaunted to reduce the fundamental manner of the arranging piece. At that element, in view of the proposed calculation, a VLSI engineering of the brand new SCL decoder is produced., the proposed LLR-2K b-SCL decoders accomplish a noteworthy slash in every zone and dormancy when contrasted with earlier works. Due to this fact, and in addition this paper suggests the affectivity of the LLR2 ok b-SCL to be multiplied through improving the MCU block

Keywords: LLR, SCL, MCU, Decoders, VLSI design, accomplish.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-D24617

THE POSSIBILITY OF MULTIPART-DRIVEN FLIP-FLOP INTEGRATION WITH CLOCK FUSION

Mr. Dr D.R.V.A.Sharath Kumar , Mr. A. Sudhakar · Professor & HOD, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally, Secunderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract The clock gating is a main method used for strength saving. It is found that the commonly used synthesis based totally gating though leaves a variety of redundant clock pulses. Data-driven gating goals to disable those. To reduce the hardware overhead concerned, flip-flops (FFs) are grouped simply so they proportion a common clock permitting signal. The question of what is the group length maximizing the energy financial savings is answered in a preceding paper. Here we answer the question of which FFs need to be located in a hard and fast to maximize the power bargain. We propose a realistic solution primarily based at the toggling activity correlations of FFs and their bodily position proximity constraints within the layout. Our statistics-driven clock gating is protected into an Electronic Design Automation (EDA) business backend format waft, achieving total energy reduction of 15%–20% for diverse sorts of large scale cutting-edge-day commercial and educational designs in 40 and sixty-five manometer technique generation.

Keywords: Flip Flop, EDA, Clock Pulses, Maximum Power, Educational Design, and Automation.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-7F042D

A LOCAL RESPONSIVE LOW-LEVEL GRADE MODEL TO COMPLETE THE IMAGE TAG

Ch. Priyanka , P.Hari Babu · Assistant Professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally, Secunderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract To effectively infuse the thought of locality sensitivity, an easy and efficient pre-processing module is made to learn appropriate representation for data partition, along with a global consensus regularize is brought to mitigate the chance of over fitting. The aim of image tag completion would be to precisely recover the missing labels for the images. To allow nonlinearity and the computational efficiency simultaneously, we turn to a locality sensitive approach, using the assumption that although nonlinear globally, the model could be straight line in your area, which enables the use of straight line models when samples are limited to individual parts of the information space. The present completion methods are often founded on straight line assumptions; therefore, the acquired models are restricted because of their incapability to capture complex correlation patterns. Extensive empirical evaluations conducted on three datasets demonstrate the success and efficiency from the suggested method, where our method outperforms previous ones with a large margin. Meanwhile, low-rank matrix factorization is utilized as local models, in which the local geometry structures are preserved for that low-dimensional representation of both tags and samples. We advise a locality sensitive lowrank model for image tag completion, which approximates the worldwide nonlinear model with an accumulation of local straight-line models, through which complex correlation structures could be taken

Keywords: Multi-Task Learning (MTL),image tagcompletion, locality sensitivemodel, low-rank matrix factorization, over-fitting

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-8E1C10

A PARALLEL AND MULTIPLE OUT USING EXCESSIVE REPRESENTATION FOR A CLASS OF LIMITED FIELDS

M Nikhil , P. Hari Babu · Assistant Professor, Electronics and Communication Engineering, St.Martin’s Engineering College, Hyderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract Redundant Based Multiplier Over Galois Field (GF (2 m)) has received big recognition in elliptic curve cryptography (ECC) especially due to their negligible hardware price for squaring and modular discount. In this paper, we've got proposed novel recursive decomposition algorithm for RB multiplication to achieve high throughput digit-serial implementation. Through efficient projection of sign- drift graph (SFG) of the proposed set of rules, a particularly ordinary processor-space drift-graph (PSFG) is derived. By identifying appropriate cut-units, we have modified the PSFG definitely and done efficient feed forward reduce-set retiming to derive 3 novel multipliers which no longer simplest involve substantially much less timecomplexity than the existing ones but additionally require much less place and less strength intake as compared with the others. Both theoretical analysis and synthesis effects con firm the performance of proposed multipliers over the present ones. The synthesis consequences for field programmable gate array (FPGA) and application precise included circuit (ASIC) consciousness of the proposed designs and competing present designs are as compared. It is shown that the proposed high-throughput systems are the great some of the corresponding designs, for FPGA and ASIC implementation. It is shown that the proposed designs can gain up to ninety four% and 60% savings of place-delay-power product (ADPP) on FPGA and ASIC implementation over the first-rate of the present designs, respectively.

Keywords: FPGA, ASIC, ADPP, Synthesis, Product.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-7DFBE6

TO EXPAND THE SMART HOME AUTOMATION SYSTEM THROUGH EMAIL BY USING RASPBERRY PI

Ailuri Rakesh Reddy , B.Shiva Krishna · Assistant Professor, Electronics and Communication Engineering St.Martin’s Engineering College, Kompally, Hyderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract Considering the fact that the technological know-how improves daily all people appears to automate lots of the possible concerns to take capabilities in offering ease in existence, secure and shop electrical vigour. The most important goal of this paper is to automate all of the contraptions i.e. House home equipment by way of electronic mail utilizing Raspberry Pi, as just right as we can have the safety for the technique by means of utilising sensors like PIR, LPG, temperature sensors. So by way of making use of this method, we are capable to prevent the issues coming in day-to-day existence. The algorithm is developed in Python language, which is default programming language of Raspberry Pi. The process sends the e-mail to the newly generated e mail identification involving current popularity of the devices. The output is stored within the e-mail identification. LEDs are used to indicate the switching movement of the instruments and sensors.

Keywords: PIR, LPG, E-mail, Raspberry Pi, LEDs, Sensor, LM-35, python language

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-CC5C3A

NOVEL CONDUIT DEDUCTION APPROACH TO DIFFERENT ROUTING IN DYNAMIC AND LARGE-SCALE NETWORKS

M.Vijaya Lakshmi , P Hari Babu · Associate Professor, Electronics and Communication Engineering St.Martin’s Engineering College, Dhulapally, Hyderabad, T.S, India, IN

📄 View / Download PDF 📄 View Details

Abstract A slow means will be to send the full routing street in each wrapping. The send of your come may be the incontrovertible fact that its understanding cost might be substantial for files including elongated routing procedure ways. Using the routing drive individually container, quite a few calibration and symptomatic modes can stance effectual administration and obligation merger for deployed WSNs repressed of loads of evaded sensor nodes. path incorporates a unique variety of a light-weight litter serve as for averment of the deduced artery ways. To be capable of similarly make stronger the hint competence along by the style performance, iPath contains a stable bootstrapping equation to refurbish the 1st meet of Trailways. To carry out the insistent boosting efficacious and adequate, two problems should be addressed. The jumble serve as should be foolish and powerful reasonably because it should be achieved on resource-restricted sensor nodes. Using the routing roadway aside file, many depth and symptomatic programs can management impressive oversight and conventions accumulation for deployed WSNs easygoing of loads of decayed sensor nodes. We put in force iPath and grade its dance the use of traces against gigantic-scale WSN deployments as well as pervasive simulations. Results disclose the one in question iPath achieves a lot outstanding improvement ratio less than different wiring settings when compared along new condition-of-the-art advisees. When compared plus Path Zip, iPath exploits large route comparability in more than one folders for light reading, resulting in much better scalability

Keywords: Measurement, path reconstruction, wirelesssensor networks.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-B9C56F

AN EXPERIMENTAL INVESTIGATION ON STABILIZED MUD MORTAR WITH YELLOW-WHITE (GREY) SOIL

Mr. Nanalal Kumawat , Mr. Ravi Dwivedi, Mr. Vikram Singh Kushwah · PG Student, Department of civil engineering, Malwa Institute of Science and Technology Indore (M.P.),, IN

📄 View / Download PDF 📄 View Details

Abstract Masonry mortar is a homogenous mixture comprising of fine aggregate, binding material and water. In the current scenario, where the supply of sand is falling short of meeting the demand, it becomes imperative to finding an alternative. The locally available soils are intended to solve this problem. Mud mortar was commonly used for low rise masonry buildings in the past. When clay containing soil used for the mortar, problems like volume instability due to its high affinity towards water occurred. To remedies this problem, stabilization of the mortar is necessary. Cement, lime and fly ash are used as binders individually and in combination. The research is focused on an experimental study to understand the various characteristics of stabilized mud mortars. Workability and strength of 24 different combinations of stabilized mud mortars have been examined. Compressive strength tests were conducted to quantify the workability of the mortars. In the present work, the viability of replacing sand partially or fully with locally available yellow-white (grey) soil and brick dust is studied. The mortar with the alternative fine aggregates mixed with different combinations of binding materials i.e., cement, lime and fly ash was tested for 7, 21 and 28 days compressive strength. The mortar with 50% replacement of sand, 12% cement and 2 % fly ash has compressive strength in the range of 5.22 MPa which is acceptable as per the IS code 2250 specification the minimum strength requirement of mortar to be 3.0 MPa. Therefore, the use of stabilized mud mortar in construction would prove to be sustainable.

Keywords: Mud mortar, compressive strength, stabilization, cement, lime and fly ash.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-C1E44D

STRENGTH PROPERTIES OF SELF COMPACTING CONCRETE WITH GLASS FIBERS AND REPLACEMENT OF FINE AGGREGATE WITH QUARRY ROCK DUST

C. Bhavana , Dr.E. Arunakanthi · PG scholar in structural engineering, JNTU, Anantapur, India, IN

📄 View / Download PDF 📄 View Details

Abstract Self Compacting concrete is high – performance concrete which flow under its own weight to fill form work and self consolidates without any mechanical vibration. Such concrete can accelerate the placement, reduce the labor requirements needed for consolidation & finishing.Concrete plays major role in construction industry. It is made of coarse aggregate, fine aggregate mixed with cement and water. But River sand is high in cost and rare material. Due to increase in its usage depletion of sand deposits is occurring. Quarry Rock Dust (QRD), a by-product from crushing process during quarrying is substitute materials for the natural river sand. In general, concrete is strong in compression & weak in tension. In this research, to increase the Tensile property of Concrete, Glass Fibers are added with dosage of 1kg per m3 of concrete. In this investigation, an attempt is made to introduce the QRD in a percentage variation and to quantify the optimum usage of QRD in replacement to Natural Sand for Fiber Reinforced Self Compacting Concrete (FRSCC). Compressive Strength & Split Tensile Strength Tests were conducted to study the Mechanical Properties of FRSCC for the replacement of Natural Sand with QRD.

Keywords: Self Compacting Concrete, Quarry rock dust, high-performance concrete, glass fibers, compressive strength, split tensile strength.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-43B023

Situation Analysis of Rural Road Maintenance Management System in Madhya Pradesh- A Case Study in Jabalpur District based on Interview and Questionnaires

Patel Ghanshyam , Dr Yadav Shalini, Dr Khatri Rajiv · Research Scholar, Ph.D., Department of Civil Engineering, AISECT University, Bhopal 462051, India, IN

📄 View / Download PDF 📄 View Details

Abstract Construction of rural roads brings multifaceted benefits to the rural areas by way of increase in agricultural production and the size of market, better prices for agriculture produce, reduction in transport cost and the creation of off-farm employment opportunities. They also provide access to medical and educational facilities. Provision of rural roads is an effective element of a poverty alleviation strategy. Rural roads form a large share of the total road network in India. If these roads are not maintained, the benefits envisaged disappear. Keeping them in a serviceable condition is crucial to the agricultural growth and affording means of access to millions of rural people to social facilities such as health and education. Subsequent to a series of regional level workshops organized by the Ministry of Rural Development, and a series of overview studies supported by the World Bank on rural road maintenance in a few states, several areas for improvements in the delivery of maintenance have been identified. These include resource mobilization, maintenance planning, technology, implementation, monitoring and capacity building of local workers. Accordingly to understand the present status, a detailed situation analysis of rural road maintenance in Madhya Pradesh by field work has been carried out in 28 Roads, four roads in each seven blocks of Jabalpur districts based on interview and Questionnaires’ in the state of Madhya Pradesh. The finding of this study will be highly useful to preserve the benefits of huge rural road assets created recently in India

Keywords: VI=Very Important, I=Important, A=Average, NI=Not Important, LI=Least Important, StA= Strongly Agreed, A = Agreed, SlA = Slightly Agreed, DA = Disagreed, SDA = Strongly Disagreed, StA = Strongly Agreed, A = Agreed, SlA = Slightly Agreed, DA = Disagreed, SDA = Strongly Disagreed.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-3764C0

HIGH-PERFORMANCE CONSTANT POWER GENERATION WITH FUZZY CONTROL OF GRID-CONNECTED PV SYSTEMS

B KIRAN KUMAR , SHAIK HUSSAIN VALI · M.Tech, JNTUA College of Engineering, Pulivendula, A.P, India. Area of interest includes Power Systems, Switchgear and Protection,Electrical-Substations., IN

📄 View / Download PDF 📄 View Details

Abstract According to the paper we are improving the control technique which is developed for incremental method of the maximum power which connect with the PV systems and also fuzzy controller and it is proposed to make sure about the fast transition and smooth between the maximum power point tracking and constant power generation (CPG) which is also proposed control strategy to achieved the stable operation regarding the solar irradiance levels and high-performance. Which is used for regulate to PV output power along with the set point and it also force the PV system to operate at the left side of the MPP without any stability problem. Fuzzy controller is advance controller which is mostly suitable for the human decision making mechanism which also provided the operation of an electronic system with the expert decision. Here the fuzzy controller is compared with the another controller. By utilizing the fuzzy controller for a nonlinear system which allow the reduction for the uncertain effect in the system which control and perfectly improve the efficiency .by utilizing the simulation result we can determine the proposed CPG control in case of high accuracy, fast dynamics and stable transition.

Keywords: Active power control, constant power control, maximum power point tracking, PV systems, power converters fuzzy control.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-44234A

FUZZY CONTROL OF AN ISLANDING DETECTION METHOD FOR THE INVERTER BASED DISTRIBUTED GENERATORS BASED REACTIVE POWER DISTURBANCE

B.MADHAVA RAO , SHAIK HUSSAIN VALI · M.Tech, JNTUA College of Engineering, Pulivendula, Andhra Pradesh, India, IN

📄 View / Download PDF 📄 View Details

Abstract In this paper, an islanding detection technique for inverter-based distributed generators (DGs) is exhibited, which depends on annoying receptive power yield. In this paper, we are using the fuzzy controller compared to other controllers. Fuzzy controller is denoted as human decision making mechanism which provided the operation for the electronic system with the expert decision. Two arrangements of unsettling influences are designed in this technique, which have distinctive amplitudes and span time. The first set of reactive power disturbance (FSORPD) is occasional with amplitudes to break the receptive power adjust amid islanding, while the greatness of the second set of reactive power disturbance (SSORPD) is adequate to drive the recurrence to stray outside its edge limits. Considering all the conceivable recurrence variety qualities with the FSORPD subsequent to islanding, three paradigms are intended for changing the unsettling influence from the FSORPD to the SSORPD. In this manner, synchronization of the SSORPDs can be ensured for the framework with numerous DGs and the strategy can identify islanding with a zero non location zone property. Besides, the technique can be connected to the DG either working at solidarity control factor or providing receptive power to for its nearby load.

Keywords: Disturbance synchronization, inverter-based distributed generation, islanding detection, reactive power disturbance, fuzzy control.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-B2FEAF

STRENGTH BEHAVIOUR OF LIME TREATED SOIL WITH RICE HUSK ASH

E.Ramanjaneya Raju , D.Prudhvi Raju, V.Chanakya Varma, J.N.S.Suryanarayana Raju · Assistant Professor, Department of Civil Engineering, SRKREC, A.P. India, IN

📄 View / Download PDF 📄 View Details

Abstract Improvement in characteristics of expansive soil by using different materials has been a challenging job for engineers. The present study, which aim to establish basic standards for the use of Lime and Rice husk ash in the stabilization of expansive soils. This study presents an experimental study in the stabilization of an expansive soil, improvement of its properties by the addition of Lime and Rice husk ash. The test result reveals that the optimum content of admixture for achieving maximum strength is approximately 4% lime mixed with 10% Rice husk ash by mass of the soil.Based on the results, it can be concluded that the expansive soil can be successfully stabilized by lime and Rice husk ash.

Keywords: Expansive Clay, Lime, Rice husk ash, Compaction, Atterberg limits, UCS, CBR.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-59958D

Experimental Study Of Modified Bitumen With Crumb Rubber (CRMB) And Low Density Polythene (LDPE)

Ashish Panthi , Dr. Y. P. Joshi, Dr. S. S. Goliya, Tanu Chaturvedi · ME Scholar, Department Of Civil Engineering, SATI Vidisha, M.P. India, IN

📄 View / Download PDF 📄 View Details

Abstract The most important and widely used material in the construction of pavement is Bituminous concrete. It consists of asphalt or bitumen (used as a binder) and mineral aggregate which are mixed together & laid down in layers then compacted. This dissertation presents a research of modification of bitumen mix by use the different materials for preventing the damage of pavement and conducted to experimental study use of waste plastic, low density polyethylene (LDPE) and crumb rubber (CRMB) for the design of bituminous mixes at the different mix design characteristics and for conventional bitumen (60/70). The dry and wet process used to find the optimum % of bitumen content.

When the crumb rubber and polythene mixed with varying percentage (3, 6, 9 and 12) and (2, 4, 6 and 8) to the 60/70 grade bitumen their optimum values are 9 % (for CRMB) and 8% (for LDPE) respectively. After combination of these materials with their optimum value with bitumen the Marshall Stability value has observed. The optimum binder content reduce to 5.25% with the combination of optimum dose of CRMB i.e., 9% and optimum dose of LDPE i.e. 8% respectively compare to ordinary bituminous mix i.e., 5.5%.

Keywords: Crumb Rubber, Low Density Polyethylene (LDPE), Bituminous Concrete, Marshall Properties, Semi Dense Bituminous Macadam (SDBM).

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-A86875

STUDY ON STRENGTH CHARACTERISTICS OF CONCRETE BY PARTIAL REPLACEMENT OF CEMENT WITH ALCCOFINE

Komala Priya , P. Eswanth, K. Shanmuka Anjaneyulu · Student of Civil Engineering, G. Pulla Reddy Engineering College, Kurnool, IN

📄 View / Download PDF 📄 View Details

Abstract The growth in the next leg of industrialisation and urbanization infrastructure is the biggest catalyst of India’s growth. A landmark in history has been created by manufacturing Alccofine which is a new generation ultrafine low calcium silicate product. It is a typical ground granulated blast slag furnace modulated by certain chemicals. It is specially processed material based on slag of high glass content with high reactivity obtained through the process of controlled granulation. It consumes calcium hydroxide from the hydration of cement to form additional C-S-H gel. The partial replacement of cement with Alccofine reduces water demand for same workability. It produces dense pore structure and ultimately higher strength gain. For growing infrastructure especially at low levels of high buildings, high strength concrete is required. This partial replacement results in better durability also. In the present study, the strength characteristics of concrete are observed by partially replacing the cement in concrete with 8%, 10% and 12% Alccofine and compared with normal concrete.

Keywords: Concrete, Cement, Alccofine, compressive strength, C-S-H Gel

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-B3AD54

EXPERIMENTAL STUDY ON RUNWAY PAVEMENT

P. Lakshmi Kantha , P. Eswanth, B. Vinod Kumar · Student of Civil Engineering, G. Pulla Reddy Engineering College, Kurnool, IN

📄 View / Download PDF 📄 View Details

Abstract The economic growth of country is dependent on increase in transportation methods. Air transportation has gained importance in the recent scenario because of reduction in travel time and increase in access to airports. Runway, a prominent part of airport is to be designed appropriately for better duration of airport and comfort to the passengers. “Runway design” is a region specific project work that aims to design the runway and orient it considering all the factors that affect, including the environmental norms and regulations. The dimensions of the runway vary on whether the airport is international or domestic. Considering the factors, Indian government has decided to have minimum of one airport in every district in India. Thus, runway design has become important aspect of growing airport industry. The present paper focuses on runway pavement, basic parameters.

Keywords: Airport, Runway, Runway dimensions and pavements.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-95D316

RADIATION EFFECT ON MHD OSCILLATORY FLOW THROUGH A POROUS MEDIUM WITH THE EFFECT OF SUCTION/INJECTION

S. Priyadharsini , K. Chitra, T.S. Shri Nandhini, A. Madhuamathi · Department of Mathematics, Sri Krishna Arts and Science College, Coimbatore, IN

📄 View / Download PDF 📄 View Details

Abstract In this paper, we investigate the unsteady oscillatory flow through a vertical channel with non-uniform wall temperature with the effect of suction/injection. The fluid is subjected to radiation effect and where the velocity slip at the lower plate is taken into consideration. Effects of the radiation parameters on temperature, skin friction, velocity profiles and the rate of heat transfer and we obtained the exact solutions of the dimensionless equations governing the fluid flow are discussed and computed graphically. Skin friction increases with the increase in injection on both channel plates.

Keywords: Oscillatory flow; Porous medium; Magnetic field; Fluid slip; Suction/injection

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-91C191

Weather Modification by Cloud seeding Technique (Artificial Rain Making)

Lateef Ahmad Dar · National Institute of Technology, Srinagar, India, IN

📄 View / Download PDF 📄 View Details

Abstract Cloud seeding involves the use of water-absorbent materials to encourage the formation of clouds and rain so that there could be increased crop production in areas where there's little water. Cloud seeding is one of the tools to mitigate the effects of drought. It is defined as a process in which the precipitation is encouraged by injecting artificial condensation nuclei through aircrafts or suitable mechanism to induce rain from rain bearing cloud. The various aspects of cloud seeding are discussed in this study.

Keywords: Cloud seeding; Snowfall; Precipitation; Clouds; Fog; Silver Iodide; Dry ice.

Vol.4, Issue 1 · (January - March) 2018 · ID: IJT-2021-021CD9

Implementation of Healthcare System for Security using QR code

Prof. Kanu G Patel , Prof. Jayna Donga, Prof. J.B. Patel · Assistant Professor, IT Department, BVM Engg. College, V.V.Nagar, IN

📄 View / Download PDF 📄 View Details

Abstract Information is unit associate in growing supply of knowledge generated from hospitals consisting of patient records within the variety of exhausting copies which may be created easier and convenient by mistreatment QR code of the patient details. Our aim is to make a Health-care vascular system which can offer the options like clinical management, patient records, unwellness prediction and generate QR code for each patient as per there updated unwellness data. Keylogging or keyboard capturing is that the activity of recording (or logging) the keys stricken on a keyboard, usually during a incommunicative means in order that the individual utilizing the keyboard is unconscious that their activities area unit being discovered. It likewise has exceptionally authentic uses in investigations of humancomputer interaction. There are numerous Keylogging techniques, extending from hardware and package primarily based methodologies to acoustic examination. Together with human in authentication protocols, whereas guaranteeing, isn't straightforward in light-weight of their restricted capability of calculation and remembrance. We tend to exhibit however careful visualization define will improve the protection yet because the convenience of authentication. We tend to propose 2 visual authentication protocols: one may be a one-time-password protocol, and also the alternative may be a password-based authentication protocol. Our approach for real arrangement: we tend to had the capability in curing abnormal state of simple use whereas fulfilling demanding security requirements.

Keywords: Keylogging, QR code

Volume 3 2017

12 issues · 216 papers

Issue 1

(January - March) 2017

1 paper →

Issue 2

(April - June) 2017

3 papers →

Issue 3

(July - September) 2017

20 papers →

Issue 4

(October - December) 2017

37 papers →

Issue 5

Issue 5 2017

22 papers →

Issue 6

Issue 6 2017

15 papers →

Issue 7

Issue 7 2017

12 papers →

Issue 8

Issue 8 2017

4 papers →

Issue 9

Issue 9 2017

9 papers →

Issue 10

Issue 10 2017

26 papers →

Issue 11

Issue 11 2017

32 papers →

Issue 12

Issue 12 2017

35 papers →

Volume 2 2016

9 issues · 32 papers

Issue 1

(January - March) 2016

1 paper →

Issue 4

(October - December) 2016

7 papers →

Issue 5

Issue 5 2016

7 papers →

Issue 6

Issue 6 2016

1 paper →

Issue 8

Issue 8 2016

1 paper →

Issue 9

Issue 9 2016

3 papers →

Issue 10

Issue 10 2016

5 papers →

Issue 11

Issue 11 2016

4 papers →

Issue 12

Issue 12 2016

3 papers →

📄 Submit Your Paper

Open Access • Blind-peer Reviewed •
UGC Approved • Quarterly Publication

Submit Now →

📅 Submission Deadline

20-Sep-2026

Vol. 12 | Issue 3 | September 2026

📄 Journal Information

Journal	:	IJTIMES
Full Name	:	International Journal of Technical Innovation in Modern Engineering & Science
ISSN Online	:	2455-2585
UGC No.	:	47719
Impact Factor	:	5.99
Frequency	:	Quarterly (4 Issues/Year)
Started	:	2015
Language	:	English
Review Type	:	Double-Blind Peer Review
Review Time	:	12-15 weeks
Access	:	Open Access
UGC Approved	:	Yes
Discipline	:	Engineering & Technology
Email	:	editor@ijtimes.com

Email	:	editor@ijtimes.com
Hours	:	Mon–Sat, 10AM–6PM IST
Response	:	Within 1–2 working days